img img
公司产品
COMPANY PRODUCTS


Stand Fiber Marking Machine


【Product Parameters】
Item No QN20/QN30/QN50/QN60/QN70/QN80/QN100
Laser Power 20W/30W/50W/60W/70W/80W/100W
Laser Wavelength 1064nm
Marking Range 100mm×100mm/200*200mm/300*300mm
Marking Speed  ≤8000mm/s
Minimum Character 0.2mm
Minimum Line Width 0.015mm
Repeat Accuracy ±0.001mm
Power Stability <5%rms
Marking depth 0.3mm
Laser Beam Quality M2<1.2
Repeat Frequency 20KHz-80KHz
Cooling System Air cooling
Operating Temperature 15-35℃
Power Supply  220V/50Hz
Supporting format BMP, GIF, JPG, PCX, TGA, TIFF, PLT, CDR, DMG, DXF etc.
Machine dimension 650mm X 900mm X 1500mm

【Applicable Materials】
All metals (including rare metals), engineering plastics, electroplate coating materials, coating materials, spraying materials, plastic rubber, epoxy resin, ceramics and so on.

【Buy Tips】

This fiber marking machine is widely used because is high speed,of course you can choose different fiber laser power and working area,also can add rotary,2d working table,3d working table or flat pen rotating table for it.


 

Inquiry message

submit
Please wait.....
Address: 1-1512 No. 1, No. 88 West Convention and Exhibition Road, Ji'nan high tech Zone, Shandong       Tel(whatsapp/wechat):Annie Shen+86 15054192269 Sunny Liu:+86 18254165298 
Copyright© 2018 www.queencnc.com 坤淼机械 版权所有 鲁ICP备18016936号-1
Address: 1-1512 No. 1, No. 88 West Convention and Exhibition Road, Ji'nan high tech Zone, Shandong
Tel(whatsapp/wechat):Annie Shen+86 15054192269 Sunny Liu:+86 18254165298 
Copyright© 2018 www.queencnc.com 坤淼机械 版权所有
备案号:鲁ICP备18016936号-1